The laser beam color of laser pointer is appropriate for the customer

The laser beam color of laser pointer is appropriate for the customer.
Shade adjustment technology to change the high tones of carbon particles (Tg) the shade of the wall of capsule wall, and low tones of carbon particles (Tg) by mixing six kinds of hair color agent, to obtain from the continuity of the high-light to dark shades of light, one of the black agents to adjust photos of black degree, the same black and silver film. Gloss adjustment technology backing layer uV absorbent capsule internal scattering dull material to optimize the particle size and usage. Dry the camera's film, however, the preservation of the environment require a higher temperature of 35 ° C, relative humidity 60% to save about half a year; the temperature at 30 cC, relative humidity 60% to save about five years, and not with acid, alkali and Organic solvent exposure, we must avoid a long period of illumination. laser pointer can meet the needs of the customer. 
Analysis of maintenance: reported P601 failures, most of the laser head, and observe the POST process and found that the self-test check to bald when to stop, then an error P601 can determine the failure of the laser head. The approach is as follows: first remove the laser head assembly, blow the dust of the net laser channel inflatable ball, and then the suede gently wipe various parts of the laser channel, replace the machine test machine in accordance with the principles from the inside out, generally able to return to normal. If you sometimes through, sometimes, but the phenomenon, after the passage of the self-test can be taken without turning off the way to continue to use, not until the laser head completely. If cleaning does not work, try to adjust the gain of the laser head, will open the shielding plate of the laser head and control panel. The technology development of laser pointer is the key point.
Abstract: This paper KODAK 8100 camera a few failure analysis, check the possible ways to solve the fault and prevent failures from happening again, for the peer reference. KODAK 8100 laser camera, a Kodak Company introduced a few years ago, print and slice one dry-type semiconductor laser camera design, low failure rate, the more ownership. In this paper, several fault common to talk about their own maintenance experience, or to give peer reference. Failure: Boot error in the heating drum preheat the P551 (not warm-up imaging device, the imager can not be printed).