Infrared flip portable green laser pointer are equipped with infrared technology

Infrared flip portable  green laser pointer  are equipped with infrared technology.   4 - natural light in Figure 5 a new type of instrument calibration using the state diagram for the instrument of locking the laser pointer lens tube through the end of the clamping device, this , laser pointer can see the target correction mark the aiming point mark. Aimed at the bull's-eye correction flag and firing a few rounds of bullets. Then adjust the laser pointer so that the aiming point mark to the point of impact center approximation until coincidence, the correction flag is still aligned bull's-eye, to complete the correction.
Infrared flip portable  green laser pointer  can transmit remote control signals.   Figure 6. 1 - partition plate; 2 - calibration mark; 3 - bull's-eye; 4 - bullet holes in Figure 6 laser pointer, as the venue change when the gun mirror deviation, the point of impact location can not be determined, can be aligned with correction flag near a target test-fired a round of bullets, for example, to determine the relative position of the bullet holes with the target to be corrected by shooting targets to complete the accurate calibration of the specified distance. The laser pointer can not see the point of impact, the point of impact center coloring to enlarge.
School Is completed, remove the instrument calibration, guns and laser pointer can be used as usual. Population compared with other calibrator calibrator friction chamber, simple operation, precise calibration, have a greater superiority. People can use infrared technology to transmit remote control signals from portable  green laser pointer . No instrument correction is not in fact each set of gun mirror with an appropriate instrument calibration, and routine instrument calibration can only complete the rough correction, laser pointer since the birth, almost all shooters will still end up without instruments revolver correction .
The most commonly used method of calibration of instruments is to maintain the same aiming point, to change the location of the point of impact, so that the point of impact to the aiming point approximation, overlap to complete the correction. Actual operation, the first laser pointer aimed at the bull's-eye shooting, and then observe the relative position of the impact point and bull's-eye, to determine the adjustment direction and adjust the volume, and adjust the laser pointer, change the orientation of the shooting of firearms in order to fix the position of point of impact.  Infrared flip portable  green laser pointer  can remotely control TV.
Aim at the bull's-eye shooting again, and verify that hit the bull's-eye. After the first test launch, adjust, to complete the correction, but in fact due to many factors, often require the above process repeated several times to complete the correction of work, time-consuming, fee bomb theory bring to the shooter a lot of the same. In fact, we can reverse the point of impact position remain unchanged, changing the aiming point position, so that the aiming point approximation to the point of impact until the overlap to complete the laser pointer revolver correction.  portable  green laser have infrared and radio frequency.